Brooks Automation
P/N: PFD0-DI-00010, Rev 5.0.0, April 9, 2022
Installation Information
Copyright © 2022, Brooks Automation, Inc.
37
Installation Information
Environmental Specifications
The PFDD robots must be installed in a non-condensing environment. Tape seals for the vertical column
are an optional order item for environments where fluid or particles may splash against the robot. For
applications where the connector panel in the base may be exposed to conductive particles or fluid, it is
recommended a panel cover splash hood be added to protect the connectors. With tape seals and a
connector hood the robot is rated at IP52. Without these features the robot is rated at IP11. This robot is
not intended for use in a washdown or heavy spray environment. Please see the
Environmental
Specifications
in Appendix B for specific environmental limits.
Facilities Connections
The Facilities Panel at the base of the robot (and optional linear axis end cap) includes:
•
System AC input power receptacle 90 to 265VAC
•
Lighted AC on/off power switch
•
Connectors for controller input and output signals
•
Two air fittings for 1/8in OD air hoses 70 psi max
