Briggs & Stratton 100600 Series, Руководство оператора

Страница: 11 / 124

11
en
Storage ‐
Figure
5
WARNING
Fuel and its vapors are extremely flammable and explosive.
Fire or explosion can cause severe burns or death.
Electrical shock.
When Storing Fuel Or Equipment With Fuel In Tank

Store away from furnaces, stoves, water heaters or other appliances that have
pilot lights or other ignition sources because they can ignite fuel vapors.
When Storing Battery Pack

Keep battery pack and battery charger dry. Do not expose battery pack or
charger to rain or wet conditions.
NOTICE: Store the engine level (normal operating position). If the engine is tipped for
maintenance, the fuel tank must be empty and the spark plug side must be up. If the fuel
tank is not empty and if the engine is tipped in any other direction, it may be difficult to
start due to oil or gasoline contaminating the air filter and / or the spark plug.
Fuel System
Fuel can become stale when stored over 30 days. Stale fuel causes acid and gum
deposits to form in the fuel system or on essential carburetor parts. To keep fuel fresh,
use Briggs & Stratton Advanced Formula Fuel Treatment & Stabilizer, available
wherever Briggs & Stratton genuine service parts are sold.
There is no need to drain gasoline from the engine if a fuel stabilizer is added according
to instructions. Run the engine for 2 minutes to circulate the stabilizer throughout the fuel
system before storage.
If gasoline in the engine has not been treated with a fuel stabilizer, it must be drained into
an approved container. Run the engine until it stops from lack of fuel. The use of a fuel
stabilizer in the storage container is recommended to maintain freshness.
Engine Oil
While the engine is still warm, change the engine oil.
Battery Pack and Charger
When not in use, disconnect charger and store in a cool, dry area. Wet, damp areas can
cause corrosion of terminals and electrical contacts. If stored for long periods in high
temperatures (120º F / 49º C), permanent damage to the battery pack can result. Check
electrical terminals and contacts on battery packs and charger. Wipe with clean cloth or
blow clean with compressed air.
After storage, a normal charge may be required. To check available charge, press the
Battery Fuel Gauge button (E, Figure 5) and charge if required. See the
Battery Fuel
Gauge
section.
Troubleshooting
Need Assistance? Go to BRIGGSandSTRATTON.COM or call
1-800-233-3723
in USA.
Specifications
Engine Specifications
Model
100600
Displacement
9.82
ci (
161
cc)
Bore
2.520
in (
64.01
mm)
Stroke
1.968
in (
49.99
mm)
Oil Capacity
18 - 20
oz (
0.54 - 0.59
L)
Battery Specifications
Lithium‐Ion Battery Pack
10.8
V
Fully Charge Minutes 60
Charging Current 2 Amps
Charger AC Input (Variable) 115 / 120 / 2 30 V
Normal Operating Temperature 32º F - 113º F (0º C - 45º C)
Tune‐up Specifications *
Model
100600
Spark Plug Gap 0.020 in ( 0.51 mm)
Spark Plug Torque
180
lb‐in (
20
Nm)
Armature Air Gap
0.006 - 0.014
in (
0.15 - 0.36
mm)
Intake Valve Clearance
0.004 - 0.006
in (
0.10 - 0.15
mm)
Exhaust Valve Clearance
0.014 - 0.016
in (
0.36 - 0.41
mm)
* Engine power will decrease 3.5% for each 1,000 feet (300 meters) above sea level and
1% for each 10º F (5.6º C) above 77º F (25º C). The engine will operate satisfactorily at
an angle up to 15º. Refer to the equipment operator's manual for safe allowable
operating limits on slopes.
Common Service Parts
n
Service Part Part Number
Air Filter
792038
Air Filter Pre‐cleaner
793676
Oil - SAE 30
100005
Advanced Formula Fuel Treatment & Stabilizer 5442
Spark Plug, Resistor
692051, 692720
Spark Plug Wrench
89838, 5023
Spark Tester
19368
Fuel Filter
298090, 5018
Lithium‐Ion Battery Pack
593560
Lithium‐Ion Battery Charger
593562
n
We recommend that you see any Briggs & Stratton Authorized Dealer for all
maintenance and service of the engine and engine parts.