6.18 Data
6.18.1 Data - Configuration
The configuration of the probe as well as alarm lists and statistics can be exported as
XML documents. This is achieved by clicking one of the links inside the
Export XML
frame. A new browser window pops up containing the selected XML document. The
browser will allow the contents of the page to be saved to file.
Restoring the probe configuration or multicast list is just as simple. Just click the
Browse
button and select the file that contains the XML document. Then click the
Go!
button and the information in the XML document will be applied. The configuration,
stream list and thresholds exports can all be imported.
Configuration files generated by an probe can be imported by the probe.
To import documents that have been manually edited the CRC attribute at the very top
of the document must be deleted (i.e. delete
crc=”...”
from the file). This will bypass
the checksum verification mechanism.
Note that the Ethernet setup parameters (IP-address, netmask and gateway) and
probe-names are not part of the XML document. Hence exporting the configuration of
one probe and restoring it on another will make the two probes identical except for the
network settings.
Clicking the Debug data export option will generate a document containing debug
information that may be useful if probe misbehaviour is reported. This file should be
sent along with a description of the misbehaviour.
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00
-
www.bridgetech.tv
241