6.15 SAT (VB270 or VB272 Option module for VB220)
The SAT tab will only be present in the graphical user interface provided that the probe
chassis is equipped with an optional DVB-S/S2 demodulator module.
The VB270 DVB-S/S2 option module offers one RF input. The VB272 DVB-S/S2 option
module offers two independent RF input modules. For the VB272 one input is active by
default and the second input can be activated through the SECOND-RF-INPUT-OPTION
license key.
If demodulator cards are present in the chassis each RF input will be labelled SAT1,
SAT2 up to SAT4 in the case of two VB272 modules being installed. SAT1 being the
leftmost, as seen from the front of the unit.
Thumbnails of SAT services are accessed from the
ETR 290 - Services
view.
6.15.1 SAT - Status
(Constellation diagram requires the Advanced RF option)
The
SAT - Status
view gives an overview of the key input interface parameters.
The SAT status view displays the following information:
SAT status - Stream info:
Packet length:
Indicates if the transport stream packets are 188 or 204
bytes
Original network
ID:
The original network ID as specified in the NIT table
Network ID:
The network ID as specified in the NIT table
Transport stream
ID:
The transport stream ID as specified in the PAT table
Total bitrate:
Current total transport stream bitrate (including null packets
- (PID 8191))
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00
-
www.bridgetech.tv
204