6.9.8 ETR 290 – T2MI (Option)
T2MI monitoring is a licensing option availble for transport streams ove ASI and
Ethernet. T2Mi is enabled on a per stream basis, most of the information is found in
this GUI extracted from the L1 current packets in the T2MI streams. The full parsing of
this information table is found in the «Tables» section.
Overview:
T2 timestamp:
The last received T2 timestamp. The probe supports both
relative and absolute timestamps.
Super frame index:
The last received superframe index.
Frame index:
The index of the last received frame.
Sismis:
Says wheter Single or Multiple Input Streams are used-
Ccmacm:
Wheter the stream uses Constant Coding and Modulation
or Adaptive Coding and Modulation.
Issy:
The Input Stream SYnchronizer value.
Ma type:
The Input Stream SYnchronizer value.
Input stream
identifier:
The input stream identifier for the current stream.
Num TS pkt. Last T2MI
frame:
The number of transport stream packets that was in the
last T2MI frame.
Null packet deletion:
Whether null packet deletion is in use or not.
Hem mode:
Wheter high efficiency mode is active or not.
Crc Errors BB Header:
The number of CRC errors on the BB header detected
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00
-
www.bridgetech.tv
132