6.8.4 Ethernet - Join
In order for the defined Ethernet multicasts to be monitored by the probe, they must
be joined. The
Ethernet - Join
view and the
Ethernet - Multicasts
view allow the
user to select which multicasts that are joined by the probe.
Streams defined in the
Ethernet - Multicasts
view will appear as available streams
on the left hand side of the arrows in this view. Select streams to be monitored by
clicking them and moving them to the right hand side of this view using the arrow.
Changes should be confirmed by clicking the
Apply changes
button.
The probe can join a maximum of 50 uni/multicasts, these may be freely associated
with the 20 probe pages. The streams will be presented in the
Joined multicasts
list in
the
Mon - Parameters
view.
It is possible to flush or fill the multicasts/unicasts to monitor list by clicking the
corresponding button. Note that these operations will take effect immediately; it is not
necessary to click
Apply changes
for multicasts to be joined or unjoined.
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00
-
www.bridgetech.tv
106