Bowflex HVT Скачать руководство пользователя страница 74

Страница: 74 / 163

Lower Hand Grip

27. Safely remove both of the Lower Hand Grips and their Snap Hooks from

the machine.

28. Attach a piece of wire or rope to the end of each Lower Rope that is at

least 3 feet in length. This wire will be used to route the Lower Ropes back

through the Platform Frames. Tie off the other end of the wire or rope to the

Support Arm.

29. Slowly pull out enough of the Right Lower Rope to be able to remove the

Securing Ball from it.

The Rope will be under tension and will want to pull itself into the

Right Platform Frame. Be sure not to allow any fingers or hands

to be pinched.

Note:

Photos are only to assist with removing the Securing Ball. To remove

the Securing Ball: Slide the Securing Ball up the rope, remove the Center

Stopper from the rope, and slide the Securing Ball off the rope.

30. Remove the Securing Ball and gently lower the rope into the Platform

Frame, releasing it with enough space to not pinch any fingers or hands.

31. From the back of the machine, pull the Right Lower Rope from the Right

Platform Frame. Only pull the Lower Rope until it is fully removed from the

Platform Frame. Be sure not to pull the end of the attached wire or rope into

the Platform Frame.

32. Disconnect the added Routing Wire or Rope from the Right Lower Rope.

This will be used to route the rope from the new Frame Assembly though the

Platform Frame.

Lower Rope

Support Arm

Содержание HVT




































































































































































Результаты поиска

Содержание HVT

Отзывы:

Похожие инструкции для HVT

Бренды по названию

Популярные бренды

Bowflex HVT, Руководство по обслуживанию

Результаты поиска

Содержание HVT

Отзывы:

Похожие инструкции для HVT

Бренды по названию

Популярные бренды