Bowflex HVT Скачать руководство пользователя страница 73

Страница: 73 / 163

Upper Pulley

Retainer

22. Slowly pull out enough of the Upper Rope to be able to remove

the Securing Ball from it.

The Rope will be under tension and will want to pull itself

into the Upper Pulley Shroud. Be sure not to allow any

fingers or hands to be pinched.

23. While keeping the rope from retracting, remove the Securing Ball

from the rope. Do not release the rope until instructed.

Note:

Be sure to observe how the rope routes through the Upper

Pulley to assist with re-assembly. To remove the Securing Ball: Slide

the Securing Ball up the rope, remove the Center Stopper from the

rope, and slide the Securing Ball off the rope.

24. With your free hand, grasp the rope below the Upper Pulley

Retainer. Release the front end of the rope and pull the rope out of

the Upper Pulley Retainer and release it.

25. Repeat the last three steps on the other side of the machine

(Steps 22-24).

26. Remove the Upper Arms with Shrouds from the Frame Assem-

bly. Be prepared to support the weight of the Upper Arm with Shroud

before removing it.

Содержание HVT




































































































































































Результаты поиска

Содержание HVT

Отзывы:

Похожие инструкции для HVT

Бренды по названию

Популярные бренды

Bowflex HVT, Руководство по обслуживанию

Результаты поиска

Содержание HVT

Отзывы:

Похожие инструкции для HVT

Бренды по названию

Популярные бренды