22
Reset the Console on the
Bowflex
®
HVT
™
machine
Skill Level: I
8015373.060117.A
Service Procedure
NOTICE:
This document provides instructions to reset the Console to the manufactured settings on the Bowflex
®
HVT
™
machine. Be aware that all information
will be erased on the Console.
If you need assistance, please call
Bowflex
Customer Service at 1-800-605-3369.
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand
all Warnings on this machine.
Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand
all Warnings on this machine.
• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause
injury to the service technician or bystanders.
• Keep bystanders and children away from the product being serviced at all times.
• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.
• Disconnect all power and allow to sit for 5 minutes before you service this machine.
• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these
components. Do not try to do heavy or awkward steps on your own.
• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can cause a
risk to users, keep the machine from operating correctly and will void the warranty.
• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or replac-
ing components. If necessary request replacement warning stickers or placards from Nautilus customer service.
• Do not try to change the design or functionality of the machine being serviced as this can adversely effect user safety and will void the warranty.
• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.
1. With the machine at the Power-Up Mode screen, push and hold down the ADD TIME and PAUSE/STOP buttons for 3 seconds to go into the Ma-
chine Settings Mode.
Note:
Push PAUSE/STOP to exit the Machine Settings Mode and return to the Power-Up Mode screen.
2. The Console display shows the TOTAL HOURS the machine has operated.
3. Push the Resistance Dial.
4. The Console display shows the Firmware Version prompt.
5. Push the Resistance Dial.
6. The Console display shows the BLE VERSION prompt.
7. Push the Resistance Dial.
8. The Console displays the DISCONNECT BLE prompt.
9. Push the Resistance Dial.
10. The Console displays the RESET CONSOLE NO prompt.
11. Turn the Resistance Dial to select the RESET CONSOLE YES prompt.
NOTICE:
With a reset of the Console, all User Profile settings and previous Workouts will be erased from the Console. This information is not
retrievable after a reset.
12. Push Resistance Dial. The Console will reset to factory settings.
13. Turn the machine off when the Console displays the “POWER CYCLE NOW” prompt.
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. www.nautilusinternational.com | Printed in China | © 2017 Nautilus,
Inc. | ® indicates trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law. Bowflex, the B logo, and HVT are trademarks owned by or licensed to
Nautilus, Inc.
