Bowflex HVT Скачать руководство пользователя страница 114

Страница: 114 / 163

114

9. Safely remove the Middle Hand Grip and the Snap Hook from the

Middle Pulley Arm being replaced.

10. Slowly pull out enough of the Middle Rope to be able to remove

the Securing Ball from it.

The Rope will be under tension and will want to pull itself

into the Middle Pulley Shroud. Be sure not to allow

fingers or hands to be pinched.

11. While keeping the rope from retracting, remove the Securing Ball

from the rope. Do not release the rope until instructed.

Note:

Be sure to observe how the rope routes through the Middle

Pulley to assist with re-assembly. To remove the Securing Ball: Slide

the Securing Ball up the rope, remove the Center Stopper from the

rope, and slide the Securing Ball off the rope.

12. With your free hand, grasp the rope behind the Front Middle

Pulley Shroud so it will not retract. Release the other end of the rope

and pull it out of the Middle Pulley Arm.

Note:

Be sure not to pinch any fingers or hands.

Middle Hand Grip

Securing Ball

Front Middle Pulley

Shroud

Содержание HVT




































































































































































Результаты поиска

Содержание HVT

Отзывы:

Похожие инструкции для HVT

Бренды по названию

Популярные бренды

Bowflex HVT, Руководство по обслуживанию

Результаты поиска

Содержание HVT

Отзывы:

Похожие инструкции для HVT

Бренды по названию

Популярные бренды