Bowflex BXT116 Скачать руководство пользователя

Страница: 2 / 179

8016497.051518.B

Service Procedures

Important Safety Instructions

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and

understand all Warnings on this machine.

Before servicing or using this equipment, obey the following warnings:

Read and understand the Service Manual before working on the machine. Failure to obey the instructions and safety warnings

could cause injury to the service technician or bystanders.

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the

wall outlet and/or the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a

secure location.

• Keep bystanders and children away from the product being serviced at all times.

• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.

• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving

these components. Do not try to do heavy or awkward steps on your own.

• Use only replacement parts and hardware that are supplied or approved by Nautilus. Failure to use Nautilus-approved replacement parts can

adversely affect the safety and functionality of the equipment creating a risk to users and will void the warranty.

• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or

replacing components. If necessary, request replacement warning stickers or placards from Nautilus customer service.

• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety and will void the warranty.

• Do not put the machine back in service until all shrouds, instructions, warning labels and correct functionality have been verified and tested for

correct performance.

NOTICE:

This document provides important safety instructions, adjustments, and general troubleshooting information for the maintenance of the

Bowflex

BXT116 Tread-

mill

If you need assistance, please call

Nautilus

Customer Service at 1-800-605-3369.

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand

all Warnings on this machine.

Nautilus, Inc., www.NautilusInc.com - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. www.nautilusinternational.com | Printed in China | © 2017 Nautilus, Inc. | ® indicates trademarks

registered in the United States. These marks may be registered in other nations or otherwise protected by common law.

Bowflex, the B logo,

Bowflex Results Series, and Bowflex Connect are trademarks owned by or licensed to

Nautilus, Inc. Polar

, OwnCode

, iTunes

, Google

, MyFitnessPal

, Under Armour, WD-40

, and Lube-N-Walk

are trademarks of their respective owners. The Bluetooth

word mark and logos are registered trademarks owned

by Bluetooth SIG, Inc., and any use of such marks by Nautilus, Inc. is under license.

Important Safety Instructions and General Troubleshooting

Information for the

Bowflex

BXT116 Treadmill

Содержание BXT116




















































































































































































Результаты поиска

Содержание BXT116

Отзывы:

Похожие инструкции для BXT116

Бренды по названию

Популярные бренды

Bowflex BXT116, Руководство по обслуживанию

Результаты поиска

Содержание BXT116

Отзывы:

Похожие инструкции для BXT116

Бренды по названию

Популярные бренды