Bowflex BXT116 Скачать руководство пользователя страница 10

Страница: 10 / 179

Bluetooth

Connectivity with the “Bowflex Results Series™” Fitness App

This fitness machine is equipped with Bluetooth

connectivity and can wirelessly sync with the “Bowflex Results Series™” Fitness App on supported

devices. The Software App syncs with your fitness machine to track total calories burned, time, distance, and more. It records and stores every

workout for quick reference. Plus, it automatically syncs your workout data with MyFitnessPal

, and Under Armour

Connected Fitness to make

hitting your daily calorie goal easier than ever! Track your results and share with friends and family.

1. Download the free Software App, named Bowflex Results Series™. The software app is available on iTunes

and Google Play™.

Note:

For a complete list of supported devices, review the software app on iTunes

or Google Play™.

2. Follow the instructions on the Software App to sync your device to your exercise machine.

3. To sync your workout data with MyFitnessPal

or Under Armour

Connected Fitness, click on the desired program and login with your

information.

Note:

The “

Bowflex Results Series™” Fitness App will automatically sync your workouts after the initial syncing.

USB Charging

If a USB Device is attached to the USB Port, the Port will attempt to charge the Device. The power supplied from the USB Port may not be enough to

operate the Device and charge it at the same time.

CONNECTIVITY

Содержание BXT116




















































































































































































Результаты поиска

Содержание BXT116

Отзывы:

Бренды по названию

Популярные бренды

Bowflex BXT116, Руководство по обслуживанию

Результаты поиска

Содержание BXT116

Отзывы:

Бренды по названию

Популярные бренды