Bosch Logamatic EMS RC35, Инструкция по установке и обслуживанию

Страница: 51 / 64

Logamatic EMS – 6 720 801 387 (2011/05) 51
Service
8
8 Service
With the service menu (not possible with boilers with UBA1.x and DBA) you can set a service
interval, and display and reset current service messages.
The interval can expire after a certain number of hours run or when a specific date is reached.
1)
The RC35 programming unit will then show a service message so that the customer can notify
you to arrange an appointment.
Service messages are identified by a Hxx code, e.g. H07.
1) Depending on the boiler used, additional service intervals may be able to be set at the boiler
programming unit.
SERVICE MENU\
SERVICE
Menu item
Input
range Standard
setting
Other information
Maintenance interval How should
servicing
messages be
triggered? No
messages,
by date, by
operation
hours No
messages When selecting “date” or
“operating hours” the
system changes
automatically to the
corresponding setting.
For “by date”:
annual servicing,
starting on: 2000-01-01 2000-01-
01
Setting date:
Hold the button
pressed down and
simultaneously turn the
rotary selector.
For “by operation
hours”: Boiler
hours run until next
service message 1,000 h to
6,000 h 1,000 h Number of hours of
operation with burner
switched on.
Current messages Message/code Display further messages:
turn rotary selector.
RESET servicing Do you wish to
reset the servicing
messages? no, yes no When selecting “yes” all
service messages are
reset.
Observe the information
on the display.
Table 22 Navigator for SERVICE MENU\SERVICE