Bosch Logamatic EMS RC35 Скачать руководство пользователя страница 16

Страница: 16 / 64

Principles of operation

Logamatic EMS – 6 720 801 387 (2011/05)

Principles of operation

4.1

Overview of controls

Key to diagram:

Flap; pull the recessed grip

on the left to open

Display

Rotary selector for changing values

and temperatures or for moving within

the menus

Keys for basic functions:

When the LED lights up,

“AUT” (automatic)

•

the switching program is active (automatic changeover between day and

night room temperatures).

“Day mode” (manual)

•

the heating system operates at the set day room temperature. The DHW

is switched on (basic setting).

“Night mode” (manual)

•

the heating system operates at the set night room temperature. Frost

protection is active. DHW heating is off (default setting).

“DHW”

•

the DHW temperature has fallen below its set value. Pushing this key

means DHW will be heated up again (the LED flashes during heat-up).

Keys for

additional functions:

Function:

“Menu/OK”

Open the user menu and confirm the current selection.

When the rotary selector is turned simultaneously: change setting.

“Clock time”

Set the time.

“Date”

Set the date.

“Flow/returntemperature”

Set the room temperature.

“Info”

Open the Info menu (to view values).

“Back”

Go back one step or one menu item.

In automatic mode the LED for the display of the current operating condition (“day” or “night”) also lights up in addition to the

LED “AUT”. Exception: with boilers with UBA1.x only the LED “AUT” lights up. The “DHW” LED can also be switched off. With

boilers with UBA1.x the “DHW” LED does not light up at all.

Содержание Logamatic EMS RC35

































































Результаты поиска

Содержание Logamatic EMS RC35

Отзывы:

Похожие инструкции для Logamatic EMS RC35

Бренды по названию

Популярные бренды

Bosch Logamatic EMS RC35, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Logamatic EMS RC35

Отзывы:

Похожие инструкции для Logamatic EMS RC35

Бренды по названию

Популярные бренды