Logamatic EMS – 6 720 801 387 (2011/05)
49
Diagnosis
7
7.3
Error message
With the
error message
menu you can display the most recent fault from the error memory, e.g in
order to investigate a fault.
It is differentiated between faults of these categories:
•
Current errors
are all open faults which are currently present in the system. These can be one
of the following types:
locking
,
blocking
or
plant error
.
•
Locking errors
1)
When the fault is eliminated, the heating system must be manually unlocked.
For this, press
Reset
on the boiler.
•
Blocking errors
1)
: with blocking faults the heating system continues to work automatically as
soon as the error status is lifted.
•
System errors
in the heating system are recorded in the RC35 programming unit, with the
exception of faults in the boiler or burner, which are either “locking” or “blocking” faults. The
heating system keeps operating as much as possible during the fault; a reset is not required.
Burner operational
Heating demand
DHW demand
Flue gas test active
Maintenance is due / fault is present
Table 21 Explanation of the symbols for footnote 1), page 48
1) Not possible with boilers with UBA1.x, DBA or UBA-H3.
A list of the locking and blocking faults can be found in the associated installation and
maintenance instructions, depending on the particular boiler.
B
Turn the rotary selector
to display the next message.
Содержание Logamatic EMS RC35
Страница 63: ...Logamatic EMS 6 720 801 387 2011 05 63 Notes ...
