61
Detaching and refitting the rails
The rails can be removed for cleaning. The oven must have
cooled down.
Unhooking the rails
1. Hold the shelf frames from underneath and pull slightly forward.
Pull the extension pins at the bottom of the rails out of the
mounting holes (Fig. A).
2. Then fold the rails upwards and carefully remove them (Fig. B).
Clean the rails with washing-up liquid and a sponge. For stubborn
deposits of dirt, use a brush.
Installing the frames
1. Insert the two hooks carefully into the upper holes. (Figure A-B)
:
Incorrect assembly!
Never move the frame before the two hooks are fully anchored
in the upper holes. The enamel could be damaged and may
break (figure C).
2. the two hooks must be inserted fully into the upper holes. Now
move the frame slowly and carefully downwards and insert in
the lower holes (figure D).
Burners and steel grid
of the gas burners
Do not clean in the dishwasher. Remove the wire rack and clean with a sponge, washing-up liquid and some hot
water. Remove the burner cup and cap. Clean with a sponge and some hot water and washing-up liquid.
Ensure that the gas outlets on the burner cups are clean and unobstructed. Brush the igniters with a small, soft
brush. The gas burners only work properly when the igniters are clean. Remove food residue from the burner
shells with some washing-up liquid and a damp cloth. Only use a little water. Water must not be allowed to enter
the appliance. Ensure that the nozzle opening does not become blocked or damaged during cleaning. Dry all
parts after cleaning and place the burner cover accurately on the burner cup. If the parts are not positioned
accurately, it will be harder to ignite the burner. The burner covers are coated with black enamel. Due to the
high temperatures, discolouration may occur. This will not impair the function of the burner. Replace the wire
rack in the oven.
Electric hob (option)
Clean with the hard side of a scouring sponge and some liquid scouring agent. After cleaning, switch the hob on
briefly to dry it. Wet hobs rust over time. Then apply a care product. Always remove spilt liquids and food resi
-
due immediately.
Metal ring of the
electric hob (option)
The metal ring may discolour with time. However, it is possible restore the original colour. Clean the ring with
the hard side of a scouring sponge and some liquid scouring agent. When doing so, make sure that you do not
scour the adjacent surfaces, as this could damage them.
Knobs
Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Door glass
Can be cleaned with glass cleaner. Do not use any abrasive cleaning agents or sharp metal objects. These
could scratch and damage the surface of the glass panel.
Seal
Wipe with a damp cloth. Dry with a soft cloth.
Oven interior
Clean with hot water or vinegar solution. For heavy soiling: Only use oven cleaner on cold surfaces.
Glass cover on the
oven light
Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Accessories
Soak in hot soapy water. Clean with a brush or a sponge.
Aluminium baking tray
(option)
Do not clean in the dishwasher. Never use oven cleaner. To avoid scratches, never touch the metal surfaces
with a knife or similar sharp object. Wipe the surfaces horizontally and without applying pressure with soapy
water and a soft window cloth or a lint-free microfibre cloth. Dry with a soft cloth. Do not use any abrasive mate
-
rials, scouring sponges or rough cleaning cloths. They could scratch the baking tray
Childproof lock
(option)
If a childproof lock has been fitted on the oven door, it must be removed before cleaning. Soak all plastic parts
in hot soapy water and wash with a sponge. Dry with a soft cloth. If very dirty, the childproof lock will not work
properly.
Plinth drawer (option) Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Accessories
Soak in hot soapy water. Clean with a brush or sponge.
%
$
%
$
&
