53
Levelling the cooker
Always place the cooker directly on the floor.
1. Pull out the plinth drawer and lift it up and out.
There are adjustable feet at the front and rear on the inside of
the plinth.
2. Use an Allen key to raise or lower the adjustable feet as
necessary until the cooker is level (picture A).
3. Push the plinth drawer back in (picture B).
Wall fixing
To prevent the cooker from tipping over, you must fix it to the wall
using the enclosed bracket. Please observe the installation
instructions for fixing the oven to the wall.
Setting up the appliance
■
The appliance must be set up directly on the kitchen floor and in
line with the specified dimensions. The appliance must not be
set up on any other object.
■
The distance between the top edge of the oven and the bottom
edge of the extractor hood must meet the requirements of the
extractor hood manufacturer.
■
Ensure that the appliance is not moved again after set up. The
distance from the high output burner or wok burner to the fronts
of the adjacent units or the wall must be at least 50 mm.
Measures to be noted during transport
Secure all mobile parts in and on the appliance using an adhesive
tape that can be removed without leaving any traces. Push all
accessories (e.g. baking tray) into the corresponding slots with
cardboard at the edges, in order to avoid damaging the appliance.
Place cardboard or similar between the front and rear side to
prevent knocks against the inside of the glass door. Secure the
door and, if available, the top cover to the appliance sides using
adhesive tape.
Keep the original appliance packaging. Only transport the
appliance in the original packaging. Observe the transport arrows
on the packaging.
If the original packaging is no longer available
pack the appliance in protective packaging to guarantee sufficient
protection against any transport damage.
Transport the appliance in an upright position. Do not hold the
appliance by the door handle or the connections on the rear, as
these could be damaged. Do not place any heavy objects on the
appliance.
%
$
0LQ
