Bosch AutoDome Junior HD VJR Series, Руководство по эксплуатации

Страница: 30 / 114

Installing a Pipe Mount
Description
This chapter details how to mount the AutoDome Junior to a pipe. The AutoDome Junior is
also suitable for surface (Installing a Surface Mount, page 16), wall (Installing a Wall Mount, page
22), and recess mounting (Installing a Recessed Mount, page 29). For specific directions on
mounting the unit, see the manual that came with your mount.
Notice!
The image sensors in modern cameras are highly sensitive and require special care for proper
performance and extended lifetime. Follow the guidelines for optimum results with your
camera:
Do not expose to direct sunlight or bright spotlights in operating and nonoperating
conditions.
Avoid bright lights in the field of view of the camera. Bright lights cause a “smearing” effect,
which is visible as white lines above and below the highlight. Prolonged exposure to bright
lights may cause bleaching of the sensor's color filters. This will be visible as colored spots in
the picture and is irreversible.
Tools/Supplies Required
– Appropriate straight slot screwdrivers
– No. 2 Phillips screwdriver
– Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable)
– T-10 Torx wrench
Preparing the Ceiling for Installation
The following instructions detail the preparation necessary to prepare the surface and the
steps to install a pipe mount.
4
Determine a secure hard surface location for the ceiling pipe mount (supplied
separately).
768.2
(30.24)
461.2
(18.16)
88.8
(3.5)
88.8
(3.5)
Ø11.2 (4x)
(0.44)
3/4-14 NP
SM Threads
Ø175.0
(6.89)
561.2
(22.09)
Figure 7.1: Pipe Mount Dimensions
7
7.1
7.1.1
7.1.2
30 en | Installing a Pipe Mount AutoDome Junior HD Series
2014.11 | 6.1 | F.01U.275.803 Operation Manual Bosch Security Systems, Inc.