Bosch AutoDome Junior HD VJR Series, Руководство по эксплуатации

Страница: 22 / 114

Installing a Wall Mount
Description
This chapter details how to mount the AutoDome Junior to a wall. The AutoDome Junior is
also suitable for surface (Installing a Surface Mount, page 16), recess (Installing a Recessed
Mount, page 29), and pipe mounting (Installing a Pipe Mount, page 30). For specific
directions on mounting the unit, see the manual that came with your mount.
Notice!
The image sensors in modern cameras are highly sensitive and require special care for proper
performance and extended lifetime. Follow the guidelines for optimum results with your
camera:
Do not expose to direct sunlight or bright spotlights in operating and nonoperating
conditions.
Avoid bright lights in the field of view of the camera. Bright lights cause a “smearing” effect,
which is visible as white lines above and below the highlight. Prolonged exposure to bright
lights may cause bleaching of the sensor's color filters. This will be visible as colored spots in
the picture and is irreversible.
Additional Tools Required
– Appropriate straight slot screwdrivers
– No. 2 Phillips screwdriver
– Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable)
– T-10 Torx wrench
Preparing the Wall Mount for an Indoor Installation
Use the following instructions to mount to an indoor wall.
4
Determine a secure location for the wall mount (supplied separately).
220.4
(8.68)
333.0
(13.11)
366.0
(14.1)
291.0
(11.46)
Figure 5.1: Wall Mount Dimensions
1. Fit a user-provided metal single-gang junction box to the wall.
2. Attach a grounded metal conduit to the junction box clamp.
5
5.1
5.1.1
5.1.2
22 en | Installing a Wall Mount AutoDome Junior HD Series
2014.11 | 6.1 | F.01U.275.803 Operation Manual Bosch Security Systems, Inc.