Bosch AutoDome Junior HD VJR Series, Руководство по эксплуатации

Страница: 82 / 114

2. Click the Remove button below the list. The storage medium is deactivated and removed
from the list.
Recording Profiles
You can define up to ten different recording profiles. You will then use these recording profiles
in the recording scheduler, where they are linked with the individual days and times (see
Recording Schedule, page 83).
Notice!
You can change or add to the recording profile description on the tabs on the Recording
Scheduler page (see Recording Schedule, page 83).
1. Click one of the tabs to edit the corresponding profile.
2. If necessary, click the Default button to return all settings to their default values.
3. Click the Copy Settings button if you want to copy the currently visible settings to other
profiles. A new window will open and you can select the profiles in which you want to
copy the settings.
4. For each profile, click the Set button to save the settings in the unit.
Standard recording
Here you can select the mode for standard recordings.
f you select Continuous, the recording proceeds continuously. If the maximum memory
capacity is reached, older recordings will automatically be overwritten. If you select the Pre-
alarm option, the device uses a special recording mode for optimal usage of storage capacity:
as soon as a time gap for alarm recording begins, a recording is continuously made on one
segment, which is the size of a complete alarm sequence (pre- and post-alarm time).
This segment functions in a similar manner to a ring buffer and is overwritten until an alarm is
actually triggered. Then, recording occurs on the segment only for the duration of the preset
post-alarm time and a new segment is subsequently used in the same manner.
If you select Off, no automatic recording takes place.
!
Caution!
You can specify limitations for overwriting older recordings in Continuous mode by
configuring the retention time (see Retention Time, page 83).
Standard profile
From this field, you can select the encoder profile to be used for recording (see Encoder
Profile, page 70).
Notice!
The recording profile can deviate from the standard setting Active profile and is only used
during an active recording.
Pre-alarm Time
You can select the required pre-alarm time from the list field.
Post-alarm Time
You can select the required post-alarm time from the list field.
Post-alarm profile
You can select the encoder profile to be used for recording during the post-alarm time (see
Encoder Profile, page 70).
The Standard profile option adopts the selection at the top of the page.
12.34
82 en | Configuring the AutoDome Junior HD AutoDome Junior HD Series
2014.11 | 6.1 | F.01U.275.803 Operation Manual Bosch Security Systems, Inc.