Bosch AutoDome Junior HD VJR Series, Руководство по эксплуатации

Страница: 75 / 114

– Night Mode: switches to Color
– Auto Iris: switches to Constant
Max. Gain Level
Controls the maximum value the gain can have during AGC operation. To set the maximum
gain level, choose from:
–
Normal
– Medium
– High
Sharpness
Adjusts the sharpness of the picture. To set the sharpness, type a value between 1 and 15
inclusive. The default setting is 12.
Shutter Mode
–
Off: turns the Auto SensUP Off.
– AutoSensUp: increases camera sensitivity by increasing the integration time on the CCD.
This is accomplished by integrating the signal from a number of consecutive video frames
to reduce signal noise.
If you select this option, the AutoDome Junior HD makes the following change
automatically:
–
Auto Iris: switches to Constant
Shutter
Adjusts the electronic shutter speed (AES). Controls the time period for which light is
gathered by the collecting device. The default setting is 1x (60 Hz: 1/30, 50 Hz: 1/25).
Auto SensUp Maximum
Sets the Auto SensUp minimum value for the AutoDome. The Auto SensUp Min. value is the
factor by which the sensitivity of the camera is increased. The default setting is 15x.
Backlight Compensation
Optimizes the video level for the selected area of the image. Parts outside this area may be
underexposed or overexposed. Select On to optimize the video level for the central area of the
image. The default setting is Off.
Stabilization
Turns on video stabilization.
Night Mode
Selects night mode (B/W) to enhance lighting in low light scenes. Select from the following
options:
–
Monochrome: Forces the camera to stay in Nigh Mode and transmit monochrome images.
– Color: The camera does not switch to Night Mode regardless of ambient light conditions.
– Auto: The camera switches out of Night Mode after the ambient light level reaches a pre-
defined threshold.
Night Mode Threshold
Adjusts the level of light at which the camera automatically switches out of night mode (B/W)
operation. Select a value between 10 and 55 (in increments of 5), where 10 is earlier and 55 is
later.
Lens Settings
Auto Focus
Continuously adjusts the lens automatically to the correct focus for the sharpest picture.
–
One Push (default): activates the Auto Focus feature after the camera stops moving.
Once focused, Auto Focus is inactive until the camera is moved again.
– Auto Focus: Auto Focus is always active.
12.23
AutoDome Junior HD Series Configuring the AutoDome Junior HD | en 75
Bosch Security Systems, Inc. Operation Manual 2014.11 | 6.1 | F.01U.275.803