Bosch AutoDome Junior HD VJR Series, Руководство по эксплуатации

Страница: 9 / 114

Your Bosch product was developed and manufactured with high-quality material
and components that can be recycled and reused. This symbol means that electronic and
electrical appliances that have reached the end of their service life must be collected and
disposed of separately from household waste material. Separate collecting systems are usually
in place for disused electronic and electrical products. Please dispose of these units at an
environmentally compatible recycling facility, in line with European Directive 2002/96/EC.
Environmental statement - Bosch has a strong commitment to the environment. This unit has
been designed to respect the environment as much as possible.
Electrostatic-sensitive device - Take proper CMOS/MOS-FET handling precautions to avoid
electrostatic discharge. NOTE: You must wear grounded wrist straps and observe proper ESD
safety precautions when handling the electrostatic-sensitive printed circuit boards.
Fuse rating - For security protection of the device, the branch circuit protection must be
secured with a maximum fuse rating of 16 A. This must be in accordance with NEC800 (CEC
Section 60).
Grounding and polarization - This unit may be fitted with a polarized alternating current line
plug (a plug with one blade wider than the other blade). This safety feature allows the plug to
fit into the power outlet in only one way. If unable to insert the plug fully into the outlet,
contact a locally certified electrician to replace the obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
Alternatively, this unit may be fitted with a 3-pole grounding plug (a plug with a third pin for
earth grounding). This safety feature allows the plug to fit into a grounded power outlet only.
If unable to insert the plug into the outlet, contact a locally certified electrician to replace the
obsolete outlet. Do not defeat the safety purpose of the grounding plug.
Outdoor signals - The installation for outdoor signals, especially regarding clearance from
power and lightning conductors and transient protection, must be in accordance with NEC725
and NEC800 (CEC Rule 16-224 and CEC Section 60).
Moving - Disconnect the power before moving the unit. Move the unit with care.
PoE (Indoor models only) - Never supply power via the Ethernet connection (PoE) when
power is already supplied via the power connector.
Permanently connected equipment - Incorporate a readily accessible disconnect device in the
building installation wiring.
Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible.
Power disconnect - Units have power supplied whenever the power cord is inserted into the
power source. The power cord is the main power disconnect for all units.
Power lines - Do not locate the camera near overhead power lines, power circuits, electrical
lights, or anywhere where it might come into contact with power lines, circuits, or lights.
SELV
All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits should
only be connected to other SELV circuits.
Because the ISDN circuits are treated like telephone-network voltage, avoid connecting the
SELV circuit to the Telephone Network Voltage (TNV) circuits.
Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security
Systems cannot be held liable for any damage that results from missing video information. To
minimize the risk of lost digital information, Bosch Security Systems recommends multiple,
redundant recording systems, and a procedure to back up all analog and digital information.
AutoDome Junior HD Series Safety | en 9
Bosch Security Systems, Inc. Operation Manual 2014.11 | 6.1 | F.01U.275.803