Boca Systems LEMUR -C, Руководство оператора

Страница: 37 / 43

36
LOAD & CUT OPTO
Once a year the opto eyes should be blown off with air. This interval will vary depending upon the
environment and the quality of the ticket stock. The print head will need to be removed to gain
access to the optos.
The below items are serviced just like a standard Lemur-C printer.
Thermal head
– See
8.1.3 Thermal Print Head
Platen
– See
8.1.4 Platen (Rubber Driver Roller)
Cutter Assembly
– See
8.2 Cutter Assembly
General Cleaning
The interior of the printer should be cleaned whenever there is a visible accumulation of dust. Use a small
vacuum for cleaning. Be careful not to jar any of the printer’s parts loose.
Click here to return to > Table of Contents
Blow out with air
in these areas