Boca Systems LEMUR -C, Руководство оператора

Страница: 29 / 43

28
APPENDIX D
– DOWNLOADING SOFTWARE COMMANDS
For those Lemurs model printers without LCD display the menu setting changes may be done by utilizing the
software commands listed below.
This is best done using our configure and test program (see Appendix C )
If needed, the printer may be defaulted back to its originally factory settings as follows. With the printer
powered off hold down the TEST button and then power up the printer. Keep the TEST button held down for
10 seconds and release (the printer will reset at this time).
Once you have your interface or driver selected then clicks on the
“Enable FGL for PCL” button.
For the MAC
customer program under the Select Printer Operation choose “Enable FGL Commands (HP)”.
Click on the Yes
Click the Yes button and then the OK button.
Window MAC
Click on the “Send Text” button.
For the MAC customer program under the Select Printer Operation choose
“Send Text Commands”.
Once the Text Data box comes up you type the text command in the Data input
box. Then click on the OK button and the text data will be sent to the printer.
You may click on the HELP button at any time to open up the help window.
The CONFIGURATION TEST TICKET SUPPLEMENT section of the
FGL programming guide shows all of the
commands necessary to access the operator control panel functions.
Click here to return to >
Table of Contents