Boca Systems LEMUR -C, Руководство оператора

Страница: 17 / 43

16
8.1.5 Platen (Rubber Driver Roller)
The Platen (rubber drive roller) should be cleaned once a year to prevent paper dust from building up on the
roller. (NOTE: The platen may require more frequent cleaning in dusty environments or under high usage)
1. Make sure power is off and the AC cord is disconnected from the printer
2. Unlock the cam lock lever and remove head mounting block/ plate. (Refer to section 8.1.3 Thermal
Print Head ).
3. Apply a small amount of Isopropyl alcohol onto a paper towel to clean the rubber roller.
4. Clean only the part of the rubber roller where the ticket stock makes contact with.
5. Rotate the rubber roller clockwise a little and repeat step 4; continue in the same manner for one full
revolution of the rubber roller.
6. Install the head mounting block/ plate and lock the cam lock lever back in place. Printer in now ready
for normal operation.
Platen color and shoulder configuration may vary
Click here to return to > Table of Contents
Platen