BlueBox IDTRONIC CX Industrial UHF, Руководство пользователя

Страница: 56 / 126

BLUEBOX CX Industrial UHF Page 56 of 126
Parameter Description Range Default
Note that 0 value stands for default settings
of the selected region.
Refer to country specific regulations for
limitations. You, the user, are responsible to
ensure operation with the correct RF settings and
are solely responsible for any fines and other
damages due to incorrect or non-compliant
country/region settings.
0 … 99
seconds
RF Channel
Pause Time
The minimum time between two consecutive
transmissions in the same RF channel.
Note that 0 value stands for default settings
of the selected region.
Refer to country specific regulations for
limitations. You, the user, are responsible to
ensure operation with the correct RF settings and
are solely responsible for any fines and other
damages due to incorrect or non-compliant
country/region settings.
0.00 … 0.99
seconds
0 … 99
seconds
0
RF Chip
Standby Mode
Activation / deactivation of the standby mode of
the RF chip during RF off conditions to reduce
power consumption and temperature increase.
Disabled
Enabled
Enabled
RSSI
Information
The detection tag’s signal RSSI I and Q measured
values information.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Disabled
Max RSSI
Information
The detected tag’s signal max RSSI I and Q
measured values information.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Disabled
Tag Read
Count
Information
The tag read count information.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Disabled
Hereinafter the configurable EPC C1G2 (Class-1 Generation-2) parameters of the
BLUEBOX .
Parameter Description Range Default
Inventory
Mode
How the r eader does an inventory in ‘continuous’
mode.
Fast Multi Tag
Fast Single
Tag
Standard Multi
Tag
Standard
Single Tag
Standard Multi
Tag