BlueBox IDTRONIC CX Industrial UHF, Руководство пользователя

Страница: 37 / 126

BLUEBOX CX Industrial UHF Page 37 of 126
3.1 General Parameters
This section provides details on the configurable general parameters of the
BLUEBOX .
Parameter Description Range Default
Device
Address
Device address of the reader on serial interface. 000 … 255 255
Baud Rate Communication baud rate on serial interface.
1200
2400
4800
9600
19200
38400
19200
Data Bits Data bits on serial interface.
7
8
8
Stop Bits Stop bits on serial interface.
1
2
1
Parity Parity on serial interface.
None
Even
Odd
None
Filter Time
Reading and tag queue management filter time.
Note that 0 setting is internally overwritten
with 1 second.
0 … 99
seconds
0 … 99
minutes
1 sec
Buzzer
Management
Buzzer management on ‘new tag’ event.
Disabled
Enabled
Enabled
Output 1
Management
Output 1 activation on tag presence / new tag
event.
Disabled
Enabled
Disabled
Reading
Antenna
Information
To add the reading antenna information to the
tag’s code.
Disabled
Enabled
Disabled
Transponder
Type
Information
To add the transponder type information in the
tag’s code.
Disabled
Enabled
Disabled
Timestamp
Information
To add the transponder detection timestamp
information in the tag’s code
Disabled
Enabled
Disabled
‘Spontaneous‘
Mode
Spontaneous mode activation . It is OR’ed with t he
dip switch SW1-2 setting.
Disabled
Enabled
Disabled
Trigger
‘ C ontinuous’
‘Continuous’ mode activation management with
inputs.
Disabled
Enabled
Disabled