BlueBox IDTRONIC CX Industrial UHF, Руководство пользователя

Страница: 44 / 126

BLUEBOX CX Industrial UHF Page 44 of 126
Parameter Description Range Default
Connection
Interval
The connection interval. Starts the auto
connection on timeout of this time interval. 0
disables the time mode.
Note that this parameter become effective
only after a reboot of the reader.
0 … 99
seconds
0 … 99
minutes
0
The auto connection parameters are stored in configuration page nr. 0x0A and
are managed through the ‘Read RAM/ROM Configuration Parameters’ and ‘Write
RAM/ROM Con figuration Parameters’ commands as described in protocol
technical manuals wher e the parameters 1…7 fields with default values are:
1 2 3 4 5 6 7
Buffer
Threshold
H
Buffer
Threshold L
Connection
Interval
0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00
Where:
Parameter Description
Buffer
Threshold H
The record buffer threshold. MSB.
Buffer
Threshold L
The record buffer threshold. LSB.
Connection
Interval
The connection interval:
• Decimal 0 … 99 for time in seconds (0 … 99 seconds);
• Decimal 100 … 199 for time in minutes (0 … 99 minutes).
3.2.4 Bluetooth Interface
This section provides details on the configurable bluetooth interface parameters
of the
BLUEBOX
Parameter Description Range Default
BLE
Encryption
Pairing
The BLE encryption pairing. Determines the policy
for new pairing requests. When set to off, all new
pairing requests are rejected. Selecting secure
enables pairing with LE Secure Connections (BLE
4.2 or newer) only, while any enables pairing with
either secure or legacy methods. When any is
selected LE Secure Connections will be used by
Any
Secure
None
Any