BlueBox IDTRONIC CX Industrial UHF, Руководство пользователя

Страница: 48 / 126

BLUEBOX CX Industrial UHF Page 48 of 126
Parameter Description
• 0x06: 500 kbit/s
• 0x07: 800 kbit/s
• 0x08: 1000 kbit/s
3.2.7 Input / Output
This section provides details on the configurable input / output parameters of
the
BLUEBOX
Parameter Description Range Default
Input 1 Mode
Input 1 activation / deactivation mode of the
‘continuous’ mode in ‘trigger’ mode.
Note that this parameter become effective
only after a reboot of the reader.
0
1
2
3
4
5
6
1
Input 2 Mode
Input 2 activation / deactivation mode of the
‘continuous’ mode in ‘trigger’ mode.
Note that this parameter become effective
only after a reboot of the reader.
0
1
2
3
4
5
6
0
Extension
Time
‘Continuous’ mode activation management with
inputs extension time.
• In ‘trigger’ mode, if =0 the trigger is level
sensitive, otherwise it is edge sensitive
and defines the ‘continuous’ mode
activation time extension after the input
change.
• In ‘gate’ mode this time defines the
‘continuous’ mode activation time
extension after the crossing of the gate. It
filters any input change until the end of
this time.
Note that this parameter become effective
only after a reboot of the reader.
0 … 99
seconds
0 … 99
minutes
0
Gate Time
Maximum gate crossing time. If =0 the ‘gate’
mode is disabled, otherwise it is the maximum
gate crossing time.
Note that this parameter become effective
only after a reboot of the reader.
0 … 99
seconds
0 … 99
minutes
0