BlueBox IDTRONIC CX Industrial UHF, Руководство пользователя, Страница: 32 / 126

BLUEBOX CX Industrial UHF Page 32 of 126
In ‘continuous’ mode the BLUEBOX can be configured to obtain the behavior of
a ‘spontaneous’ reader that will send a message on the RS232/RS485 serial line
(if available) and/or on the Ethernet 10-100M connection (if available), as a TCP
Server or TCP Client (optionally with HTTP POST messages), and/or data bus (if
available) and/or CAN bus (if available) and/or Bluetooth connection (if
available). This feature is enabled (on) / disabled (off) by the switch 2 of the dip
switch SW1 or via communication software.
• If configured and av ailable an host can receive the ‘spontaneous’ message
through the RS232/RS485 s erial port. The ‘spontaneous’ m essage is sent
only once and no ACK/NAK reply message is implemented, see the
protocol manual for details
. Do not use the ‘spontaneous’ message fe ature
in a RS485 ‘multipoint’ network to avoid communication errors due to
unmanaged collisions on RS485 bus!
• If configured and available an host can connect the reader on the
configured TCP server socket and wait for ‘spontaneous’ messages. The
‘spontaneous’ m essage is sent only once and no ACK/NAK reply message
is implemented except of the normal TCP handshake mechanism, see the
protocol manual for details.
• If configured and available an host can wait for an incoming TCP
connection to receive the ‘spontaneous’ messages. The ‘spontaneous’
message is sent only once and no ACK/NAK reply message is implemented
except of the normal TCP handshake mechanism, see the protocol manual
for details. On a succesful connection there is a fixed inactivity timeout of
120 seconds.
• If configured and available an host can wait for incoming HTTP POST to
receive ‘spotaneous’ messages. The ‘spontaneous’ message is sent only
once. On a succesful connection there is a fixed inactivity timeout of 120
seconds.
These are the POST variables sent by BLUEBOX :
o
reader_sn : the BLUEBOX serial number.
o
mac_address : the BLUEBOX MAC address.
o
ip_address : the BLUEBOX IP address.
o
tag_type : the transponder type (optional variable present only
if the tag type information flag in the general parameters is
active)
:
▪
0x02: ISO 18000-63
28
(EPC Class-1 Gen-2).
28 ISO 18000-6C became ISO 18000-63 in 2012 due to ISO naming rules that do not allow letters in standards names.