SMARTLINK
I&II
MDS921AE-10BTS - MDS
port
TCP/UDP port number
server
Host IP address and port number
protocol
Transport protocol
name
Service name
begin
The schedule of beginning time
end
The schedule of ending time
Set the active interface number via
You can configure the global port number by using
The local server, host, IP address and port number are configured via
The authorized access protocol is setup via
Name
command can be used to configure the service name of the host server.
Begin
and
end
command is used to setup the local server schedule to access.
You can view the fixed NAT mapping entry via
DMZ
To setup demilitarized zone, move the cursor “>>” to
>> active
Tigger DMZ host function
address
Configure virtual IP address and interface
You can enable the demilitarized zone via
After enabling the DMZ, shift the cursor to
----------------------------------------------------------------------
Command: setup ip_share dmz address <ip> <1~10>
Message: Please input the following information.
Virtual IP address:
192.168.0.251
Active interface number (Enter for default) <1>:
----------------------------------------------------------------------
Firewall
The product supports advanced firewall. To setup the advanced firewall, you can use
configure.
>> Level
Configure firewall security level
pkt_filter
Configure packet filter
dos_protection
Configure DoS protection
There are three level of firewall which you can setup in this product.
Level one, basic, only enables the NAT firewall and the
firewall will take effect if NAT function is enabled. The remote management security is default to
block any WAN side connection to the device. Non
remote management connectio
Level two, automatic, enables basic firewall security, all DoS protection, and the SPI filter function.
S957AE-10BTS User Manual
Page 109 of 113
TCP/UDP port number
Host IP address and port number
Transport protocol
Service name
The schedule of beginning time
The schedule of ending time
Set the active interface number via
interface
command.
You can configure the global port number by using
port
command.
The local server, host, IP address and port number are configured via
server
The authorized access protocol is setup via
protocol
command.
command can be used to configure the service name of the host server.
command is used to setup the local server schedule to access.
You can view the fixed NAT mapping entry via
list
command.
To setup demilitarized zone, move the cursor “>>” to
dmz
and press enter.
Tigger DMZ host function
Configure virtual IP address and interface
You can enable the demilitarized zone via
active
command.
After enabling the DMZ, shift the cursor to
address
and press enter.
----------------------------------------------------------------------
Command: setup ip_share dmz address <ip> <1~10>
Message: Please input the following information.
192.168.0.251
Active interface number (Enter for default) <1>:
1
----------------------------------------------------------------------
The product supports advanced firewall. To setup the advanced firewall, you can use
Configure firewall security level
Configure packet filter
Configure DoS protection
There are three level of firewall which you can setup in this product.
Level one, basic, only enables the NAT firewall and the remote management security. The NAT
firewall will take effect if NAT function is enabled. The remote management security is default to
block any WAN side connection to the device. Non-empty legal IP pool in ADMIN will block all
remote management connection except those IPs specified in the pool.
Level two, automatic, enables basic firewall security, all DoS protection, and the SPI filter function.
command.
command can be used to configure the service name of the host server.
command is used to setup the local server schedule to access.
The product supports advanced firewall. To setup the advanced firewall, you can use
firewall
to
remote management security. The NAT
firewall will take effect if NAT function is enabled. The remote management security is default to
empty legal IP pool in ADMIN will block all
Level two, automatic, enables basic firewall security, all DoS protection, and the SPI filter function.
