SMARTLINK
I&II
MDS921AE-10BTS - MDS
Security
For system secutiry, suggest to change the default user name and password in the first setup
otherwise unauthorized persons can access the router and change the parameters.
There are three ways to configure the router, Web browser, telnet and ser
Press Security to setup the parameters.
For greater security, change the Supervisor ID and password for the gateway. If you don’t set them,
all users on your network can be able to access the gateway using the default IP and Password
root.
You can authorize five legal users to access the router via telnet or console. There are two UI
modes, menu driven mode and command mode to configure the router.
Legal address pool will setup the legal IP addresses from which authorized person can
the gateway. This is the more secure function for network administrator to setup the legal address
of configuration.
Configured 0.0.0.0 will allow all hosts on Internet or LAN to access the router.
Leaving blank of trust host list will cause bl
other hand, only PC in LAN can access the router.
If you type the excact IP address in the filed, only the host can access the router.
Click Finish to finish the setting.
S957AE-10BTS User Manual
Page 69 of 113
For system secutiry, suggest to change the default user name and password in the first setup
otherwise unauthorized persons can access the router and change the parameters.
There are three ways to configure the router, Web browser, telnet and serial console.
to setup the parameters.
For greater security, change the Supervisor ID and password for the gateway. If you don’t set them,
all users on your network can be able to access the gateway using the default IP and Password
You can authorize five legal users to access the router via telnet or console. There are two UI
modes, menu driven mode and command mode to configure the router.
Legal address pool will setup the legal IP addresses from which authorized person can
the gateway. This is the more secure function for network administrator to setup the legal address
Configured 0.0.0.0 will allow all hosts on Internet or LAN to access the router.
Leaving blank of trust host list will cause blocking all PC from WAN to access the router. On the
other hand, only PC in LAN can access the router.
If you type the excact IP address in the filed, only the host can access the router.
to finish the setting.
For system secutiry, suggest to change the default user name and password in the first setup
otherwise unauthorized persons can access the router and change the parameters.
ial console.
For greater security, change the Supervisor ID and password for the gateway. If you don’t set them,
all users on your network can be able to access the gateway using the default IP and Password
You can authorize five legal users to access the router via telnet or console. There are two UI
Legal address pool will setup the legal IP addresses from which authorized person can configure
the gateway. This is the more secure function for network administrator to setup the legal address
Configured 0.0.0.0 will allow all hosts on Internet or LAN to access the router.
ocking all PC from WAN to access the router. On the
If you type the excact IP address in the filed, only the host can access the router.
