SMARTLINK
I&II
MDS921AE-10BTS - MDS
Rear Panel
The rear panel of SHDSL router is where all of the connections are made.
9 VDC
9V
Power adaptor inlet: Input voltage 12VDC
Switching HUB
4 Port Ethernet 10Base
MONITOR
RS-
xDSL
G.SHDSL interface for WAN port (RJ
Button near xDSL
Reset Button
The reset button can be used only in one of two ways.
•
When you want to change its configuration but you forget the user name or password,
Press the Reset Button a while with a paper clip or sharp penc
Button will cause the product
configuration.
•
If the product is having problems connecting to the Internet and you want to configure it
again clearing all configurations, press the Reset But
Pressing the Reset Button will cause the produc
losing all of yours configuration.
S957AE-10BTS User Manual
Page 17 of 113
The rear panel of SHDSL router is where all of the connections are made.
4- Port Switch
MONITOR
xDSL
SA-PAM-SAN-ATM-4ETH-FW-4W
Connectors Description
Power adaptor inlet: Input voltage 12VDC
4 Port Ethernet 10Base-T for LAN (RJ-45)
232C (DB9) for system configuration and maintenance
G.SHDSL interface for WAN port (RJ-11) 2 or 4-wire
Reset Button
The reset button can be used only in one of two ways.
When you want to change its configuration but you forget the user name or password,
Press the Reset Button a while with a paper clip or sharp pencil. Pressing the Reset
Button will cause the product loading the factory default setting and losing all of yours
If the product is having problems connecting to the Internet and you want to configure it
again clearing all configurations, press the Reset Button with a paper clip or sharp
Pressing the Reset Button will cause the product loading the factory default
losing all of yours configuration.
xDSL
232C (DB9) for system configuration and maintenance
When you want to change its configuration but you forget the user name or password,
il. Pressing the Reset
loading the factory default setting and losing all of yours
If the product is having problems connecting to the Internet and you want to configure it
ton with a paper clip or sharp pencil.
t loading the factory default setting and