SMARTLINK
I&II
MDS921AE-10BTS - MDS
Supervisor password and ID
The supervisor password and ID are the last door for security but the most important. Users who
access the router via web browser have to use the ID and password to configure the router and
users who access the router via telnet or console mode have to use
router. Suggest to change the ID and password after the first time of configuration, and save it. At
next time when you access to the router, you have to use the new password.
----------------------------------------------------------------------
Command: admin passwd <pass_conf>
Message: Please input the following information.
Input old Supervisor password:
Input new Supervisor password:
Re-type Supervisor password:
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: admin id <pass_conf>
Message: Please input the following information.
Legal user name (Enter for default) <root> :
----------------------------------------------------------------------
SNTP
Time synchronization is an essential element for any business that relies on an IT system. The
reason for this is that these systems all have clocks
operations they handle. Without time synchronization, time on these systems varies with each
other or with the correct time and this can cause
system log exposures with wrong data.
There are two methods to synchronize time, synchronize with PC or SNTPv4. If you choose
synchronize with PC, the router will synchronize with PC. If you choose SNTPv4, the router will
use the protocol to synchronize with the time server. Sync
needs to configure service, time_server and time_zone. Synchronization with PC does not need to
configure the above parameters.
Move the cursor “
>>
“ to
sntp
>> method
Select time synchronization
service
Tigger SNTP v4.0 service
time_server1
Configure time server 1
time_server2
Configure time server 2
time_server3
Configure time server 3
updaterate
Configure update period
time_zone
Configure GMT time zone offset
list
Show SNTP configuration
To configure SNTP v4 time synchronization, follow the below procedures.
move the cursor to method and press enter.
----------------------------------------------------------------------
Command: admin sntp method <
Message: Please input the following information.
SYNC method (Enter for default) <SyncWithPC> :
----------------------------------------------------------------------
S957AE-10BTS User Manual
Page 97 of 113
Supervisor password and ID
The supervisor password and ID are the last door for security but the most important. Users who
access the router via web browser have to use the ID and password to configure the router and
users who access the router via telnet or console mode have to use the password to configure the
router. Suggest to change the ID and password after the first time of configuration, and save it. At
next time when you access to the router, you have to use the new password.
----------------------------------------------------------------------
Command: admin passwd <pass_conf>
Message: Please input the following information.
Input old Supervisor password:
****
Input new Supervisor password:
********
rd:
********
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: admin id <pass_conf>
Message: Please input the following information.
er for default) <root> :
test
----------------------------------------------------------------------
Time synchronization is an essential element for any business that relies on an IT system. The
reason for this is that these systems all have clocks that are the source of time for files or
operations they handle. Without time synchronization, time on these systems varies with each
other or with the correct time and this can cause- virtual server schedule processes to fail and
wrong data.
There are two methods to synchronize time, synchronize with PC or SNTPv4. If you choose
synchronize with PC, the router will synchronize with PC. If you choose SNTPv4, the router will
use the protocol to synchronize with the time server. Synchronization with time server, SNTP v4,
needs to configure service, time_server and time_zone. Synchronization with PC does not need to
configure the above parameters.
sntp
and press enter.
Select time synchronization method
Tigger SNTP v4.0 service
Configure time server 1
Configure time server 2
Configure time server 3
Configure update period
Configure GMT time zone offset
Show SNTP configuration
To configure SNTP v4 time synchronization, follow the below procedures.
move the cursor to method and press enter.
----------------------------------------------------------------------
Command: admin sntp method <SNTPv4|SyncWithPC>
Message: Please input the following information.
SYNC method (Enter for default) <SyncWithPC> :
SNTPv4
----------------------------------------------------------------------
The supervisor password and ID are the last door for security but the most important. Users who
access the router via web browser have to use the ID and password to configure the router and
the password to configure the
router. Suggest to change the ID and password after the first time of configuration, and save it. At
next time when you access to the router, you have to use the new password.
Time synchronization is an essential element for any business that relies on an IT system. The
that are the source of time for files or
operations they handle. Without time synchronization, time on these systems varies with each
virtual server schedule processes to fail and
There are two methods to synchronize time, synchronize with PC or SNTPv4. If you choose
synchronize with PC, the router will synchronize with PC. If you choose SNTPv4, the router will
hronization with time server, SNTP v4,
needs to configure service, time_server and time_zone. Synchronization with PC does not need to
