Black Box MDS921AE-10BTS-R2 Скачать руководство пользователя

Страница: 105 / 113

SMARTLINK

I&II

MDS921AE-10BTS - MDS

network  packets’  route  based  on  the  fewest  number  of  hops
destination.  The  RIP  protocol  regularly  broadcasts  routing  information  to  other  routers  on  the
network.
You can setup 20 sets of static route in static command. After entering
show as follow:

>>  add

Add static route entry

delete

Delete static route entry

list

Show static routing table

You can add 20 sets of static route entry by using
static route including IP address, subnet mask and gateway.

You can delete the static route information via

You can review the static route entry by using list command.

To configure Routing Information Protocol (RIP), you can use
parameters. Move the cursor “

>> generic

Configure operation and auto summery mode

lan

Configure LAN interface RIP parameters

wan

Configure WAN interface RIP parameters

list

Show RIP configuration

Generic

command can setup RIP mode and auto summery mode.

If there are any routers in your LAN, you can configure LAN interface RIP parameters via
command.

The product supports 8 PVCs and you can configure the RIP parameters of each WAN via
command. Move the cursor “

----------------------------------------------------------------------
Command: setup route rip wan <1~8> <more...>
Message: Please input the following information.

Active interface number <1~8>:

-----------------------------------------------------------------

The screen will prompt as follow:

>> attrib

Operation, authentication and Poison reverse mode

version

RIP protocol version

authe

Authentication code

Attrib

command can configure RIP mode, authentication type and Poison reverse mode.

Version

command can configure RIP protocol version.

Authe

command can configure authentication code.

You can review the list of RIP parameters via

S957AE-10BTS User Manual

Page 105 of 113

network packets’ route based on the fewest number of hops between the source and the
destination. The RIP protocol regularly broadcasts routing information to other routers on the

You can setup 20 sets of static route in static command. After entering

static

menu, the screen will

Add static route entry
Delete static route entry
Show static routing table

You can add 20 sets of static route entry by using

add

command. Type the IP information of the

static route including IP address, subnet mask and gateway.

You can delete the static route information via

delete

command.

You can review the static route entry by using list command.

To configure Routing Information Protocol (RIP), you can use

rip

command to setup the

parameters. Move the cursor “

” to

rip

and press enter.

Configure operation and auto summery mode
Configure LAN interface RIP parameters
Configure WAN interface RIP parameters
Show RIP configuration

command can setup RIP mode and auto summery mode.

If there are any routers in your LAN, you can configure LAN interface RIP parameters via

The product supports 8 PVCs and you can configure the RIP parameters of each WAN via
command. Move the cursor “

” to

wan

and press enter.

-------------------------------------------------------------

Command: setup route rip wan <1~8> <more...>
Message: Please input the following information.

Active interface number <1~8>:

----------------------------------------------------------------------

The screen will prompt as follow:

Operation, authentication and Poison reverse mode
RIP protocol version
Authentication code

command can configure RIP mode, authentication type and Poison reverse mode.

command can configure RIP protocol version.

command can configure authentication code.

You can review the list of RIP parameters via

list

command.

between the source and the

destination. The RIP protocol regularly broadcasts routing information to other routers on the

menu, the screen will

command. Type the IP information of the

command to setup the

If there are any routers in your LAN, you can configure LAN interface RIP parameters via

lan

The product supports 8 PVCs and you can configure the RIP parameters of each WAN via

wan

command can configure RIP mode, authentication type and Poison reverse mode.

Содержание MDS921AE-10BTS-R2


















































































































Результаты поиска

Содержание MDS921AE-10BTS-R2

Отзывы:

Похожие инструкции для MDS921AE-10BTS-R2

Бренды по названию

Популярные бренды

Black Box MDS921AE-10BTS-R2, Руководство пользователя

Результаты поиска

Содержание MDS921AE-10BTS-R2

Отзывы:

Похожие инструкции для MDS921AE-10BTS-R2

Бренды по названию

Популярные бренды