SMARTLINK
I&II
MDS921AE-10BTS - MDS
----------------------------------------------------------------------
Command: setup ip_share nat virtual range <1~5> <ip> <1~253>
Message: Please input the following information.
NAT local address range entry number <1~5>:
Base address:
192.168.0.2
Number of address:
49
----------------------------------------------------------------------
You can delete virtual IP address range
You can view the virtual IP address range via
To setup global IP address pool, move the cursor “
>> range
Edit global IP address pool
interface
Bind address pool to specific interface
delete
Delete
list
Show global IP address pool
You can create five global IP address pool range via
----------------------------------------------------------------------
Command: setup ip_share nat global range <1~5> <ip>
Message: Please input the following information.
NAT global IP address range entry number <1~5>:
Base address:
122.22.22.2
Number of address:
3
----------------------------------------------------------------------
After configuration global IP address range, You can bind address pool to specific interface via
bind command.
----------------------------------------------------------------------
Command: setup ip_share nat global interface <1~5> <1~8>
Message: Please input the following
NAT global ddress range entry number <1~5>:
Active interface number <1~8>:
----------------------------------------------------------------------
You can delete global IP address range
You can view the global IP address range via
S957AE-10BTS User Manual
Page 107 of 113
----------------------------------------------------------------------
Command: setup ip_share nat virtual range <1~5> <ip> <1~253>
Message: Please input the following information.
NAT local address range entry number <1~5>:
1
----------------------------------------------------------------------
You can delete virtual IP address range- from 1 to 5- by using
delete
command.
view the virtual IP address range via
list
command.
To setup global IP address pool, move the cursor “
>>
” to
global
command and press enter.
Edit global IP address pool
Bind address pool to specific interface
Delete global IP address pool
Show global IP address pool
You can create five global IP address pool range via
range
command.
----------------------------------------------------------------------
Command: setup ip_share nat global range <1~5> <ip> <1~253>
Message: Please input the following information.
NAT global IP address range entry number <1~5>:
1
----------------------------------------------------------------------
P address range, You can bind address pool to specific interface via
----------------------------------------------------------------------
Command: setup ip_share nat global interface <1~5> <1~8>
Message: Please input the following information.
NAT global ddress range entry number <1~5>:
1
Active interface number <1~8>:
1
----------------------------------------------------------------------
You can delete global IP address range- from 1 to 5- by using
delete
command.
You can view the global IP address range via
list
command.
command.
command and press enter.
P address range, You can bind address pool to specific interface via
command.