SMARTLINK
I&II
MDS921AE-10BTS - MDS
PPPoE or PPPoA
PPPoA (point-to-point protocol over ATM) and PPPoE (point
authentication and connection protocols used by many service providers for broadband Internet
access. These are specifications for connecting multiple computer users on an Ethernet local area
network to a remote site through common customer premises equipment, which is the telephone
company's term for a modem and similar devices. PPPoE and PPPoA can be used to o
building. Users share a common Digital Subscriber Line (DSL), cable modem, or wireless
connection to the Internet. PPPoE and PPPoA combine the Point
commonly used in dialup connections, with the Ethernet protocol or ATM pr
multiple users in a local area network. The PPP protocol information is encapsulated within an
Ethernet frame or ATM frame.
Before your configure the router, check
VPI:
VCI:
Encapsulation:
User Name:
Password:
DNS Server:
Host Name: (if applicable)
IP address: (if applicable)
Key in the WAN1 parameters:
VPI: 0
VCI: 32
AAL5 Encap: LLC
Protocol: PPPoA + NAT or PPPoE
Click Next to setup User name and password.
For more understanding about NAT, review NAT/DMZ.
S957AE-10BTS User Manual
Page 30 of 113
point protocol over ATM) and PPPoE (point-to-point protocol over Ethernet) are
authentication and connection protocols used by many service providers for broadband Internet
are specifications for connecting multiple computer users on an Ethernet local area
network to a remote site through common customer premises equipment, which is the telephone
company's term for a modem and similar devices. PPPoE and PPPoA can be used to o
building. Users share a common Digital Subscriber Line (DSL), cable modem, or wireless
connection to the Internet. PPPoE and PPPoA combine the Point-to-Point Protocol (PPP),
commonly used in dialup connections, with the Ethernet protocol or ATM protocol, which supports
multiple users in a local area network. The PPP protocol information is encapsulated within an
Ethernet frame or ATM frame.
the router, check the information below with your ISP.
(if applicable)
licable)
Key in the WAN1 parameters:
PPPoE + NAT
to setup User name and password.
For more understanding about NAT, review NAT/DMZ.
point protocol over Ethernet) are
authentication and connection protocols used by many service providers for broadband Internet
are specifications for connecting multiple computer users on an Ethernet local area
network to a remote site through common customer premises equipment, which is the telephone
company's term for a modem and similar devices. PPPoE and PPPoA can be used to office or
building. Users share a common Digital Subscriber Line (DSL), cable modem, or wireless
Point Protocol (PPP),
otocol, which supports
multiple users in a local area network. The PPP protocol information is encapsulated within an
