background image

Creative Solutions for the Digital Life

T

he new Actiontec USB/Ethernet DSL Modem with
Routing Capabilities is really two devices rolled into
one. It’s a full rate ADSL2/2+ modem. And it’s a router,

capable of networking up to two computers, via wired ports,
and even more using a switch or hub, with a minimum
amount of hassle. So, get rid of the clutter of components on
your desk and replace them all with the Actiontec
USB/Ethernet DSL Modem with Routing Capabilities.

ADSL2/2+

ADSL2/2+ is the DSL standard that enhances modem
performance by tripling the available bandwidth (from 8 Mbps
to 24 Mbps). Say goodbye to stuttering, pixilated video
streams and the endless wait while downloading large files.
There’s more room for voice data, as well, so you can experience
free or low-cost Internet telephone conversations.

Leading Chipset Architecture

The DSL Modem includes TI’s TNETD7200 Broadband
Communication Processor and Peripherals. The TNETD7200
is the industry’s most densely integrated system-on-a-chip
ever offered to the ADSL CPE market by Texas Instruments.
The TNETD7200 is considered an ADSL bridge/router solution,
integrating a broadband communications processor and
peripherals, ADSL physical layer, ADSL line driver, USB physical
layer, and Ethernet physical layer.

Features

Supports UPnP Plug-and-Play installation for systems with
Windows Operating Systems (98, 98SE, Me, 2000 and XP)

Support One ADSL2+ WAN port (RJ11)

Compliant with full-rate ANSI T1.413 Issue 2, ITU G.992.1
(G.dmt) and G.992.2(G.lite) standard

Auto-handshake for different ADSL flavors

Compliant with USB 1.1 device specification

Supports 12-Mbits/s USB data rate (Full Speed)

Bridged Ethernet over ATM, PPP over ATM, PPP over
Ethernet

Precise ATM traffic shaping

IP packet routing and transparent bridge

Routing protocol supports RIP-1, RIP-2, Static Routing

Build-in NAT, DHCP server

DNS relay support

PAP/CHAP authentication, administrative passwords
through Telnet

Compliant with IEEE 802.3 Ethernet standard

Supports One 10/100 Base-T Ethernet LAN port

Flow control support for Fast Ethernet

Web-based configuration setup

Default configuration backup restore

FTP firmware upgradeable

Support web download

Model # GT701C

Содержание Actiontec USB/Ethernet DSL Modem with Routing Capabilities GT701C

Страница 1: ... on a chip ever offered to the ADSL CPE market by Texas Instruments The TNETD7200 is considered anADSL bridge router solution integrating a broadband communications processor and peripherals ADSL physical layer ADSL line driver USB physical layer and Ethernet physical layer Features Supports UPnP Plug and Play installation for systems with Windows Operating Systems 98 98SE Me 2000 and XP Support O...

Страница 2: ...ms over Ethernet networks C Hornig Apr 01 1984 RFC 826 Ethernet Address Resolution Protocol Or converting network protocol addresses to 48 bit Ethernet address for transmission on Ethernet hardware D C Plummer Nov 01 1982 Features ADSL ATM OAM Ethernet Bridge IP ARP Technical Specifications USB Ethernet DSL Modem with Routing Capabilities ICMP UDP TCP IP Router RIP DHCP Server DHCP Client DNS Rela...

Страница 3: ...Encapsulation over ATM Adaptation Layer 5 07 20 1993 RFC1213 S K McCloghrie M Rose Management Information Base for Network Management of TCP IP based internet MIB II 03 26 1991 RFC 2684 Multiprotocol Encapsulation over ATM Adaptation Layer 5 D Grossman J Heinanen September 1999 RFC 854 Telnet Protocol specification J Postel J K Reynolds May 01 1983 RFC 855 Telnet option specifications J Postel J K...

Страница 4: ...ce 760 N Mary Avenue Sunnyvale CA 94085 2008 Actiontec Electronics Inc Actiontec Actiontec Installation Buddy Connection 1 2 3 Creative Solutions for the Digital Life Actiontec Digital Gear and the Actiontec logo are trademarks or registered trademarks of Actiontec Electronics Inc All other names are properties of their respective owners Product photo may differ from actual product however functio...

Отзывы: