Black Box LGB6026A, Руководство по управлению

Страница: 731 / 1289

– 729 –
C
HAPTER
29 | Authentication Commands
Telnet Server
ip http secure-port
This command specifies the UDP port number used for HTTPS connection to
the switch’s web interface. Use the no form to restore the default port.
S
YNTAX
ip http secure-port port_number
no ip http secure-port
port_number – The UDP port used for HTTPS. (Range: 1-65535)
D
EFAULT
S
ETTING
443
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
◆
You cannot configure the HTTP and HTTPS servers to use the same
port.
◆
If you change the HTTPS port number, clients attempting to connect to
the HTTPS server must specify the port number in the URL, in this
format:
https:// device : port_number
E
XAMPLE
Console(config)#ip http secure-port 1000
Console(config)#
R
ELATED
C
OMMANDS
ip http secure-server (727)
show system (631)
T
ELNET
S
ERVER
This section describes commands used to configure Telnet management
access to the switch.
Table 66: Telnet Server Commands
Command Function Mode
ip telnet max-sessions Specifies the maximum number of Telnet sessions GC
that can simultaneously connect to this system
ip telnet port Specifies the port to be used by the Telnet interface GC
ip telnet server Allows the switch to be monitored or configured from GC
Telnet
show ip telnet Displays configuration settings for the Telnet server PE