Black Box LGB6026A, Руководство по управлению

Страница: 638 / 1289

– 636 –
C
HAPTER
25 | System Management Commands
File Management
The configuration file can be downloaded under a new file name and then
set as the startup file, or the current startup configuration file can be
specified as the destination file to directly replace it. Note that the file
“Factory_Default_Config.cfg” can be copied to the FTP/TFTP server, but
cannot be used as the destination on the switch.
Table 40: Flash/File Commands
Command Function Mode
boot system Specifies the file or image used to start up the GC
system
copy Copies a code image or a switch configuration to or PE
from flash memory or an FTP/TFTP server
delete Deletes a file or code image PE
dir Displays a list of files in flash memory PE
whichboot Displays the files booted PE
boot system
This command specifies the file or image used to start up the system.
S
YNTAX
boot system { boot-rom | config | opcode }: filename
boot-rom * - Boot ROM. config * -
Configuration file. opcode * - Run-
time operation code.
filename - Name of configuration file or code image.
* The colon (:) is required.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
◆
A colon (:) is required after the specified file type.
◆
If the file contains an error, it cannot be set as the default file.
E
XAMPLE
Console(config)#boot system config: startup
Console(config)#
R
ELATED
C
OMMANDS
dir (640)
whichboot (641)