Black Box LGB6026A, Руководство по управлению

Страница: 860 / 1289

– 858 –
C
HAPTER
36 | Address Table Commands
■
Learn - Dynamic address entries
■
Config - Static entry
◆
The mask should be hexadecimal numbers (representing an equivalent
bit mask) in the form xx-xx-xx-xx-xx-xx that is applied to the specified
MAC address. Enter hexadecimal numbers, where an equivalent binary
bit “0” means to match a bit and “1” means to ignore a bit. For
example, a mask of 00-00-00-00-00-00 means an exact match, and a
mask of FF-FF-FF-FF-FF-FF means “any.”
◆
The maximum number of address entries is 16K.
E
XAMPLE
Console#show mac-address-table
Interface MAC Address VLAN Type Life Time
--------- ----------------- ---- -------- -----------------
Eth 1/ 1 00-E0-29-94-34-DE 1 Config Delete on Reset
Eth 1/21 00-01-EC-F8-D8-D9 1 Learn Delete on Timeout
Console#
show mac-address-
table aging-time
This command shows the aging time for entries in the address table.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show mac-address-table aging-time
Aging Status : Enabled
Aging Time: 300 sec.
Console#
show mac-address-
table count
This command shows the number of MAC addresses used and the number
of available MAC addresses for the overall system or for an interface.
S
YNTAX
show mac-address-table count [ interface interface ]
interface
ethernet unit / port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-26/50)
port-channel channel-id (Range: 1-32)