Black Box LGB6026A, Руководство по управлению

Страница: 633 / 1289

– 631 –
C
HAPTER
25 | System Management Commands
System Status
show startup-config
This command displays the configuration file stored in non-volatile memory
that is used to start up the system.
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
◆
Use this command in conjunction with the show running-config
command to compare the information in running memory to the
information stored in non-volatile memory.
◆
This command displays settings for key command modes. Each mode
group is separated by “!” symbols, and includes the configuration mode
command, and corresponding commands. This command displays the
following information:
■
MAC address for the switch
■
SNMP community strings
■
Users (names, access levels, and encrypted passwords)
■
VLAN database (VLAN ID, name and state)
■
VLAN configuration settings for each interface
■
Multiple spanning tree instances (name and interfaces)
■
IP address configured for VLANs
■
Layer 4 precedence settings
■
Routing protocol configuration settings
■
Spanning tree settings
■
Interface settings
■
Any configured settings for the console port and Telnet
E
XAMPLE
Refer to the example for the running configuration file.
R
ELATED
C
OMMANDS
show running-config (629)
show system
This command displays system information.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Normal Exec, Privileged Exec
C
OMMAND
U
SAGE
◆
For a description of the items shown by this command, refer to
"Displaying System Information" on page 105 .
◆
There are three fans in both models. Fan 1 and 2 are inside the unit and
provide cooling for the power supply. Fan 3 is located on the right side
of the unit, and forces air out.