Black Box LGB6026A, Руководство по управлению

Страница: 1144 / 1289

– 1142 –
C
HAPTER
47 | IP Routing Commands
Open Shortest Path First (OSPFv2)
R
ELATED
C
OMMANDS
area stub (1149)
area nssa (1147)
area range
This command summarizes the routes advertised by an Area Border Router
(ABR). Use the
no form to disable this function.
S
YNTAX
[ no ] area area-id range ip-address netmask [ advertise |
not-advertise ]
area-id - Identifies an area for which the routes are summarized.
The area ID can be in the form of an IPv4 address or as a four octet
unsigned integer ranging from 0-4294967295.
ip-address - Base address for the routes to summarize.
netmask - Network mask for the summary route.
advertise - Advertises the specified address range.
not-advertise - The summary is not sent, and the routes remain
hidden from the rest of the network.
C
OMMAND
M
ODE
Router Configuration
D
EFAULT
S
ETTING
Disabled
C
OMMAND
U
SAGE
◆
This command can be used to summarize intra-area routes and
advertise this information to other areas through Area Border Routers
(ABRs).
◆
If the network addresses within an area are assigned in a contiguous
manner, the ABRs can advertise a summary route that covers all of the
individual networks within the area that fall into the specified range
using a single
area range command.
◆
If routes are set to be advertised by this command, the router will issue
a Type 3 summary LSA for each address range specified by this
command.
◆
This router supports up 64 summary routes for area ranges.
E
XAMPLE
This example creates a summary address for all area routes in the range of
10.2.x.x.
Console(config-router)#area 10.2.0.0 range 10.2.0.0 255.255.0.0 advertise
Console(config-router)#