Black Box LGB6026A, Руководство по управлению

Страница: 937 / 1289

– 935 –
C
HAPTER
39 | Class of Service Commands
Priority Commands (Layer 3 and 4)
E
XAMPLE
The following example shows how to map IP DSCP value 1 to CoS value 0:
Console(config)#interface ethernet 1/5
Console(config-if)#map ip dscp 1 cos 0
Console(config-if)#
map ip port
(Interface
Configuration)
This command sets IP port priority (i.e., TCP/UDP port priority). Use the no
form to remove a specific setting.
S
YNTAX
map ip port port-number cos cos-value
no map ip port port-number
port-number - 16-bit TCP/UDP port number. (Range: 0-65535)
cos-value - Class-of-Service value (Range: 0-7)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
U
SAGE
◆
The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
◆
Up to 8 entries can be specified for IP Port priority mapping.
◆
This command sets the IP port priority for all interfaces.
E
XAMPLE
The following example shows how to map HTTP traffic to CoS value 0:
Console(config)#interface ethernet 1/5
Console(config-if)#map ip port 80 cos 0
Console(config-if)#