Black Box LGB6026A, Руководство по управлению

Страница: 637 / 1289

– 635 –
C
HAPTER
25 | System Management Commands
Fan Control
F
AN
C
ONTROL
This section describes the command used to force fan speed.
Table 39: Fan Control Commands
Command Function Mode
fan-speed force-full Forces fans to full speed GC
show system Shows if full fan speed is enabled NE, PE
fan-speed force-full
This command sets all fans to full speed. Use the no form to reset the fans
to normal operating speed.
S
YNTAX
[ no ] fan-speed force-full
D
EFAULT
S
ETTING
Normal speed
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
Console(config)#fan-speed force-full
Console(config)#
F
ILE
M
ANAGEMENT
Managing Firmware
Firmware can be uploaded and downloaded to or from an FTP/TFTP server.
By saving runtime code to a file on an FTP/TFTP server, that file can later
be downloaded to the switch to restore operation. The switch can also be
set to use new firmware without overwriting the previous version.
When downloading runtime code, the destination file name can be specified
to replace the current image, or the file can be first downloaded using a
different name from the current runtime code file, and then the new file set
as the startup file.
Saving or Restoring Configuration Settings
Configuration settings can be uploaded and downloaded to and from an
FTP/TFTP server. The configuration file can be later downloaded to restore
switch settings.