Black Box LGB6026A, Руководство по управлению

Страница: 113 / 1289

– 111 –
C
HAPTER
4 | Basic Management Tasks
Managing System Files
You can also set the switch to use new firmware or configuration settings
without overwriting the current version. Just download the file using a
different name from the current version, and then set the new file as the
startup file.
CLI R
EFERENCES
◆
"copy" on page 637
P
ARAMETERS
The following parameters are displayed in the web interface:
◆
Copy Type – The firmware copy operation includes these options:
■
FTP Upgrade – Copies a file from an FTP server to the switch.
■
FTP Download – Copies a file from the switch to an FTP server.
■
HTTP Upgrade – Copies a file from a management station to the
switch.
■
HTTP Download – Copies a file from the switch to a management
station
■
TFTP Upgrade – Copies a file from a TFTP server to the switch.
■
TFTP Download – Copies a file from the switch to a TFTP server.
◆
FTP / TFTP Server IP Address – IP address of an FTP or TFTP server.
◆
User Name – The user name for FTP server access.
◆
Password – The password for FTP server access.
◆
File Type – Specify Operation Code to copy firmware.
◆
File Name – The file name should not contain slashes (\ or /), the
leading letter of the file name should not be a period (.), and the
maximum length for file names is 31 characters for files on the switch.
(Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
N
OTE
:
Up to two copies of the system software (i.e., the runtime firmware)
can be stored in the file directory on the switch.
N
OTE
:
The maximum number of user-defined configuration files is limited
only by available flash memory space.
N
OTE
:
The file
“
Factory_Default_Config.cfg
”
can be copied to a file server
or management station, but cannot be used as the destination file name on
the switch.