Black Box LGB6026A, Руководство по управлению

Страница: 144 / 1289

– 142 –
C
HAPTER
5 | Interface Configuration
Trunk Configuration
disconnect the ports before removing a static trunk via the
configuration interface.
P
ARAMETERS
These parameters are displayed in the web interface:
◆
Trunk ID – Trunk identifier. (Range: 1-32)
◆
Member – The initial trunk member. Use the Add Member page to
configure additional members.
■
Unit – Stack unit. (Range: 1)
■
Port – Port identifier. (Range: 1-26/50)
W
EB
I
NTERFACE
To create a static trunk:
1. Click Interface, Trunk, Static.
2. Select Configure Trunk from the Step list.
3. Select Add from the Action list.
4. Enter a trunk identifier.
5. Set the unit and port for the initial trunk member.
6. Click Apply.
Figure 32: Creating Static Trunks
To add member ports to a static trunk:
1. Click Interface, Trunk, Static.
2. Select Configure Trunk from the Step list.
3.
Select Add Member from the Action list.
4. Select a trunk identifier.
5. Set the unit and port for an additional trunk member.