Black Box LGB6026A, Руководство по управлению

Страница: 1180 / 1289

– 1178 –
C
HAPTER
47 | IP Routing Commands
Open Shortest Path First (OSPFv3)
router ipv6 ospf
This command creates an Open Shortest Path First (OSPFv3) routing
process and enters router configuration mode. Use the
no form to disable
OSPF for all processes or for a specified process.
S
YNTAX
[ no ] router ipv6 ospf [ tag process-name ]
process-name - A process name must be entered when configuring
multiple routing instances. (Range: Alphanumeric string up to 16
characters)
C
OMMAND
M
ODE
Global Configuration
D
EFAULT
S
ETTING
Disabled
C
OMMAND
U
SAGE
◆
This command is used to enable an OSPFv3 routing process, and to
enter router configuration mode.
◆
The process-name is only used on the local router to distinguish
between different routing processes. It should not be confused with the
instance-id configured with the ipv6 router ospf area command which is
used to distinguish between different routing processes running on the
same link-local network segment.
E
XAMPLE
Console(config)#router ipv6 ospf tag 0
Console(config-router)#end
Console#show ipv6 ospf
Routing Process "ospf r&d" with ID 192.168.0.2
Process uptime is 1 hour 34 minutes
Supports only single TOS(TOS0) routes
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Number of incomming concurrent DD exchange neighbors 0/5
Number of outgoing concurrent DD exchange neighbors 0/5
Number of external LSA 0. Checksum 0x000000
Number of opaque AS LSA 0. Checksum 0x000000
Number of LSA received 0
Number of areas attached to this router: 1
Area 0.0.0.0 (BACKBONE)
SPF algorithm executed 1 times
Number of LSA 2. Checksum 0x00ab4f
Console#
R
ELATED
C
OMMANDS
ipv6 router ospf area (1189)