Black Box Advanced Console Server Скачать руководство пользователя страница 168

Страница: 168 / 392

Applications Menu & Forms

138

Click the yellow light bulb icon adjacent to the group name once to
turn all of the outlets off.

All of the outlets are in the same state.

To turn all of the outlets on, click the grey light bulb icon adjacent to
the group name.

To Lock or Unlock a Group of Outlets in the Same Power
State

Use these instructions if all of the outlets in a group are either locked or
unlocked.

Go to Applications > IPDU Multi-Outlet Ctrl.

To lock the group of outlets, click the open padlock icon adjacent to the
group name.

To unlock the group of outlets, click the closed padlock icon adjacent to
the group name.

To Lock or Unlock a Group of Outlets in Different Lock
States

Use these instructions if not all of the outlets in a group are locked or
unlocked.

Go to Applications > IPDU Multi-Outlet Ctrl.

To lock the group of outlets, do the following steps:

Click the open padlock icon adjacent to the group name once to
unlock all of the outlets.

All of the outlets are in the same state (open padlock).

To lock all of the outlets, click the open padlock icon adjacent to the
group name.

To unlock the group of outlets, click the closed padlock icon adjacent to
the group name.

To Turn the Power of a Group of Outlets Off and On Again

This procedure works only with groups of outlets that are all turned on.

Содержание Advanced Console Server









































































































































































































































































































































































































Результаты поиска

Содержание Advanced Console Server

Отзывы:

Похожие инструкции для Advanced Console Server

Бренды по названию

Популярные бренды

Black Box Advanced Console Server, Руководство пользователя

Результаты поиска

Содержание Advanced Console Server

Отзывы:

Похожие инструкции для Advanced Console Server

Бренды по названию

Популярные бренды