BT-750 Operator Manual 45
P/N : OPM(BT-750)EN Bistos Co.,Ltd. Rev.02(2013.04.12)
Chapter 8
Measurement of NIBP
8.1 Setting NIBP
1) Choose the proper cuff for the patient.
2) Connect the cuff hose to cuff.
3) Connect the cuff hose to NIBP font.
4) Put the cuff on the patient.
5) Use the proper cuff to the patient before measuring blood pressure.
8.1.1 NIBP measurement
1) It should be measured at the same label of the patient’s heart in the arms and legs of the
patient.
2) The cuff ties part under the position to be measured.
It may cause errors in measurement values.
3) NIBP measurement will be done with
button
and if you press the button
one more time, it
stops measurement.
Note
It is impossible to measure the blood pressure in upper arm, in case
that infusion pump or catheter is inserted in the blood vessel. It may
cause damages in the organ around catheter during the supply of
blood pressure.
Caution
Use the proper cuff to the patient before measuring blood pressure.
Inspect excess blood pressure or folding of cuff.
Avoid the cuff from getting wetness out of any kinds of incidents,
and use it after dry completely.
NIBP hose connector
